APPLICATION OF FUZZY HESITATION MODEL IN THE OPTIMISATION OF MECHANICAL PROCESS PARAMETERS

Article Sidebar

PDF
Published: 2025-10-11
DOI: https://doi.org/10.2316/
Keywords:
Fuzzy hesitation model, mechanical technology, parameter optimi-sation, apply optimisation strategy in practice

Main Article Content

Xiaoqing Zhou
Zhimin Wan
Ting Wang

Abstract

In recent years, with the rise of Industry 4.0 and intelligent manufacturing, the optimisation of mechanical process parameters has become a hot issue in the industry and academia. Therefore, the application and value of fuzzy hesitation model in the optimisation of mechanical process parameters are discussed in this paper. First, the relevant data are collected, preprocessed and analysed, and then a preliminary model is constructed for prediction. Based on the verification results of the preliminary model, several strategies are proposed to improve and optimise the model. To improve the efficiency and quality of machining, a series of optimisation strategies for practical applications are also proposed. Overall, this study provides an effective method for the optimisation of mechanical process parameters, and lays a solid foundation for future research and application.

Downloads

Download data is not yet available.

Article Details

Issue

Vol. 53 (2025): Open Access Issues

Section

Articles

How to Cite

APPLICATION OF FUZZY HESITATION MODEL IN THE OPTIMISATION OF MECHANICAL PROCESS PARAMETERS. (2025). Mechatronic Systems and Control, 53(7). https://doi.org/10.2316/

References

[1] J.D. Kechagias, N. Vidakis, and M. Petousis, Parametereffects and process modeling of FFF-TPU mechanicalresponse, Materials and Manufacturing Processes, 38(3), 2023,341–351.

[2] F. Burcea, A. Herrmann, B. Li, and H. Graeb, MEMS-ICrobustness optimization considering electrical and mechanicaldesign and process parameters, ACM Transactions on DesignAutomation of Electronic Systems, 24(4), 2019, 43.

[3] J. Retolaza, K. Gondra, R. Ansola, and A. Allue, Mechanicalresearch to optimize parameter selection for PPS materialprocessed by FDM, Materials and Manufacturing Processes,37(11), 2022, 1332–1338.

[4] S.H. Hosseini and M. Sedighi, Process parameter effects onmicrostructure and mechanical properties of tubes processedvia friction assisted tube straining method, Journal of CentralSouth University, 28(10), 2021, 3008–3017.

[5] Y.Z. Zhang, M. Gao, and X.Y. Zeng, Effect of pro-cess parameters on mechanical properties of wire andarc additive-manufactured AlCu6Mn, JOM, 71(3), 2019,886–892.

[6] B.F. Liu, L. Yang, R. Zhou, and B. Hong, Effect of processparameters on mechanical properties of additive manufacturedSMP structures based on FDM, Materials Testing, 64(3), 2022,378–390.

[7] M. Kam, A. Ipek¸ci, and ¨O Seng¨ul, Taguchi optimization offused deposition modeling process parameters on mechanicalcharacteristics of PLA plus filament material, Scientia Iranica,29(1), 2022, 79–89.

[8] K. Wafaie, H. Mohammed, A.M. El Sergani, I. Almagrami,A.G. Qaisi, and Q. Yiqiang, Analysis and optimization of FFFprocess parameters to enhance the mechanical properties of3D printed PLA products, Australasian Orthodontic Journal,39(1), 2023, 42–48.

[9] T. Sheikh and K. Behdinan, The effect of process parameterson the mechanical properties of additively manufactured partsusing a hierarchical multiscale model, Rapid PrototypingJournal, 29(5), 2023, 1029–1043.

[10] A. Bacciaglia, A. Ceruti, and A. Liverani, Controllablepitch propeller optimization through meta-heuristic algorithm,Engineering With Computers, 37(3), 2021, 2257–2271.

[11] K. Rezvani, A. Gaffari, and M.R.E. Dishabi, The bedbug meta-heuristic algorithm to solve optimization problems, Journal ofBionic Engineering, 20(5), 2023, 2465–2485.

[12] B. Boazzo, G. Pellegrino, and A. Vagati, Multipolar SPMmachines for direct-drive application: A general designapproach, IEEE Transactions on Industry Applications, 50(1),2014, 327–337.

[13] S. Mondal and C. Mhanta, Adaptive integral higherorder sliding mode controller for uncertain systems,Journal of Control Theory Application, 1(61), 2013,61–68.

[14] P.L. Shyamsundar, P.L. Rishi, and P.L. Jamuna, LQR basedfuzzy logic rudder control system using DC servomotor,Proc. 5th International Conf. on Advanced ComputingCommunication Systems (ICACCS), Coimbatore, India, 2019,124–127.

[15] A.R. Nasser, A.T. Azar, A.J. Humaidi, A.K. Al-Mhdawi, andI.K. Ibraheem, Intelligent fault detection and identificationapproach for analog electronic circuits based on fuzzy logicclassifier, Electronics, 10(23), 2021, 2888.

[16] H. Kantrong, C. Charunuch, N. Limsangouan, and W.Pengpinit, Influence of process parameters on physicalproperties and specific mechanical energy of healthy mushroom-rice snacks and optimization of extrusion process parametersusing response surface methodology, Journal of Food Scienceand Technology-Mysore, 55(9), 2018, 3462–3472.

[17] M. Samiuddin, J.L. Li, M. Taimoor, M.N. Siddiqui, S.U.Siddiqui, and J.T. Xiong, Investigation on the processparameters of TIG-welded aluminum alloy through mechanicaland microstructural characterization, Defence Technology,17(4), 2021, 1234–1248.

[18] M. Idriss, F. Mirakhorli, A. Desrochers, and A. Maslouhi, Over-lap laser welding of 5052-H36 aluminum alloy: Experimentalinvestigation of process parameters and mechanical designs,International Journal of Advanced Manufacturing Technology,119(11–12), 2022, 7653–7667.

[19] W.F. Yuan, X.G. Zheng, and N.M. Shahani, Optimization ofindirect fracturing process parameters based on mechanicalproperties of fractured and low-permeability coal, Geofluids,2022, 2022, 7436051.

[20] H.Q. Liu, H.A. Ma, C.X. Wang, F. Wang, B.M. Liu, and J.X.Chen, Enhanced thermoelectric properties of nonstoichiometricTiO1.76 with excellent mechanical properties induced byoptimizing processing parameters, Ceramics International,44(16), 2018, 19859–19865.

[21] Y.A. Wang, L.S. Luo, T. Liu, B.B. Wang, L. Luo, and J.H.Zhao, Tuning process parameters to optimize microstructureand mechanical properties of novel maraging steel fabricated byselective laser melting, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,823, 2021, 141740.

[22] Q. Wang, Z.H. Zhang, X. Tong, S.Y. Dong, Z.Q. Cui, and X.Wang, Effects of process parameters on the microstructure andmechanical properties of 24CrNiMo steel fabricated by selectivelaser melting, Optics and Laser Technology, 128, 2020, 106262.

[23] Y.J. Seo, Methodological consideration on the prediction ofelectrochemical mechanical polishing process parameters bymonitoring of electrochemical characteristics of copper surface,Journal of Electrochemical Science and Technology, 11(4),2020, 346–351.

[24] M. Schubert, M. Lukovic, and H. Christen, Prediction ofmechanical properties of wood fiber insulation boards as afunction of machine and process parameters by random forest,Wood Science and Technology, 54(3), 2020, 703–713.

[25] B.G. Guan, M.L. Guo, Y.F. Qin, and C.J. Liu, Applicationof ant colony algorithm in laser cutting path optimisation ofsheet metal parts, Mechatronic Systems and Control, 51(4),159–165.

[26] M.S. Afsharkohan, S. Dehrooyeh, M. Sohrabian, and M.Vaseghi, Influence of processing parameters tuning andrheological characterization on improvement of mechanicalproperties and fabrication accuracy of 3D printed models,Rapid Prototyping Journal, 29(4), 2023, 867–881.

[27] T.D. McLouth, D.B. Witkin, G.E. Bean, S.D. Sitzman, P.M.Adams, and J.R. Lohser, Variations in ambient and elevatedtemperature mechanical behavior of IN718 manufactured byselective laser melting via process parameter control, MaterialsScience and Engineering A-Structural Materials PropertiesMicrostructure and Processing, 780, 2020, 139184.

[28] V.T. Minh, R. Moezzi, J. Cyrus, and J. Hlava, Fuzzy systemfor clutch engagement and vibration control in parallel hybridelectric vehicle, Mechatronic Systems and Control, 51(1), 2023,25–33.

[29] A. Premnath, Optimization of the process parameters on themechanical and wear properties of Al-SiC nano-compositesfabricated by friction stir processing using desirabilityapproach, Silicon, 12(3), 2020, 665–675.